Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5312MF

5300-M Medium Series Bearing
Item #102142478
  • 60 mm ID x 130 mm OD x 2 1/8" Wide
  • Single Shield
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 60 mm ID x 130 mm OD x 2 1/8" Wide
  • Single Shield
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
O.D. 5.12 in, 130 mm
Contact Angle 30 Degree
Radial Internal Clearance Normal
Precision Standard
O.D. Type Cylindrical
Precision Level Standard (ABEC 1)
Cage Material Bearing Steel
Rows of Balls Double
Snap Ring No Snap Ring
Preload Level C3 Axial Clearance
Limiting Speed - Grease 3400 rpm
icNumber 7698791
Seal Type Non-Contacting Seal
Series 5300M
Inner Ring Width 2.13 in, 54 mm
Enclosure Shield On One Side
Static Load Rating 143 kN
No. in Set Single Bearing
Width 2.13 in, 53.98 mm
Bore Type Cylindrical
Limiting Speed - Oil 4500 rpm
I.D. 2.36 in, 60 mm
Bearing Type Unmounted, Angular Contact
Dynamic Load Rating 134 kN
Fillet Radius 2 mm
Material Bearing Steel
Cage Type Metal
Inch/Metric Metric
Ball Material Steel
Limiting Speed - Sealed 3400 rpm
Radial Internal Clearance Specification Normal Clearance
Lubricant Oil Preservative
Outer Ring Width 2.13 in, 54 mm
Origin Double Row Deep Groove
Seal Material Tinplate
Capacity Maximum Capacity
Static Load Rating [Max] 32100 lbf
Flush Ground No
Locking Device No Locking Device
Weight 6.76 LB
EAN or UPC 97741015424
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison