Skip to content Skip to navigation menu
5300-C, 5300-SB Medium Series Bearing

5308CFG

5300-C, 5300-SB Medium Series Bearing
Item #101169012
  • 40 mm ID x 90 mm OD x 1 7/16" Wide
  • Single Shield
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
5300-C, 5300-SB Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 40 mm ID x 90 mm OD x 1 7/16" Wide
  • Single Shield
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Cage Material Bearing Steel
Origin Double Row Deep Groove
icNumber 7704782
Preload Level C3 Axial Clearance
Cage Type Metal
Fillet Radius 1.5 mm
No. in Set Single Bearing
Inch/Metric Metric
Width 1.44 in, 36.51 mm
Rows of Balls Double
Outer Ring Width 1.44 in, 36.5 mm
Material Bearing Steel
Series 5300C
Dynamic Load Rating 60.5 kN
O.D. 3.8 in, 96.5 mm
Enclosure Shield On One Side
Precision Level Standard (ABEC 1)
Precision Standard
Capacity Standard Capacity
O.D. Type Cylindrical
Radial Internal Clearance C3
Seal Type Non-Contacting Seal
Static Load Rating 43 kN
Inner Ring Width 1.44 in, 36.5 mm
Static Load Rating [Max] 9760 lbf
Bore Type Cylindrical
Bearing Type Unmounted, Angular Contact
Locking Device No Locking Device
Limiting Speed - Grease 5000 rpm
I.D. 1.57 in, 40 mm
Seal Material Tinplate
Ball Material Steel
Lubricant Oil Preservative
Radial Internal Clearance Specification Normal Clearance
Limiting Speed - Oil 6700 rpm
Contact Angle 30 Degree
Flush Ground No
Locating Snap Ring Fitted
Limiting Speed - Sealed 5000 rpm
Snap Ring With Snap Ring
Weight 2.141 LB
EAN or UPC 97741014557
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison