Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5307MG

5300-M Medium Series Bearing
Item #100760648
  • 35 mm ID x 80 mm OD x 1 3/8" Wide
  • Open
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 35 mm ID x 80 mm OD x 1 3/8" Wide
  • Open
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Limiting Speed - Oil 7500 rpm
Locking Device No Locking Device
Rows of Balls Double
Outer Ring Width 1 3/8 in
Limiting Speed - Grease 5600 rpm
icNumber 7699719
Inch/Metric Metric Bore
Locating Snap Ring Fitted
Static Load Rating [Max] 10800 lbf
Snap Ring With Snap Ring
Limiting Speed - Sealed 5600 rpm
Static Load Rating 48 kN
Inner Ring Width 1 3/8 in
Temperature Range [Max] 450 °F
Lubricant Oil Preservative
Seal Material None
Cage Type Metal
Contact Angle 30°
Precision Standard
Precision Level Standard (ABEC 1)
Cage Material Steel
I.D. 35 mm
Radial Internal Clearance Normal
Ball Material Steel
Capacity Maximum Capacity
Width 34.925 mm
Enclosure Open
Bore Type Round Bore
Preload Level None
O.D. Type Straight w/ Snap Ring
No. in Set Single Bearing
Flush Ground No
Radial Internal Clearance Specification Normal Clearance
Series 5300M
Origin Double Row Deep Groove
Dynamic Load Rating 11800 lbf
Fillet Radius 1.5 mm
O.D. 80 mm
Material Steel
Seal Type Unsealed
Bearing Type Angular Contact
Weight 1.697 LB
EAN or UPC 97741014465
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison