Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5306MG

5300-M Medium Series Bearing
Item #100760627
  • 30 mm ID x 72 mm OD x 1 3/16" Wide
  • Open
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 30 mm ID x 72 mm OD x 1 3/16" Wide
  • Open
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Ball Material Steel
Static Load Rating [Max] 9670 lbf
Locating Snap Ring Fitted
Limiting Speed - Sealed 6300 rpm
Lubricant Oil Preservative
icNumber 7699717
Contact Angle 30°
Flush Ground No
Outer Ring Width 1 3/16 in
Cage Material Steel
O.D. Type Straight w/ Snap Ring
Bore Type Round Bore
Locking Device No Locking Device
Inch/Metric Metric Bore
Dynamic Load Rating 10500 lbf
Bearing Type Angular Contact
No. in Set Single Bearing
Cage Type Metal
Series 5300M
Fillet Radius 1 mm
Limiting Speed - Grease 6300 rpm
Width 30.163 mm
Limiting Speed - Oil 8500 rpm
Temperature Range [Max] 450 °F
Origin Double Row Deep Groove
Preload Level None
Seal Type Unsealed
Capacity Maximum Capacity
I.D. 30 mm
Enclosure Open
Snap Ring With Snap Ring
Radial Internal Clearance Normal
Precision Level Standard (ABEC 1)
Inner Ring Width 1 3/16 in
Material Steel
Precision Standard
Radial Internal Clearance Specification Normal Clearance
Seal Material None
O.D. 72 mm
Rows of Balls Double
Static Load Rating 43 kN
Weight 1.276 LB
EAN or UPC 97741014267
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison