Skip to content Skip to navigation menu
5200-M Light Series Bearing

5217MG

5200-M Light Series Bearing
Item #102167854
  • 85 mm ID x 150 mm OD x 1 15/16" Wide
  • Open
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5200-M Light Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 85 mm ID x 150 mm OD x 1 15/16" Wide
  • Open
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both
  • Thrust load should be carried on the nonfilling notch row
  • Moderate thrust load is permissible on the filling notch row

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Bore Type Cylindrical
Inch/Metric Metric
Lubricant Oil Preservative
No. in Set Single Bearing
Preload Level C3 Axial Clearance
Fillet Radius 2 mm
Limiting Speed - Grease 2600 rpm
I.D. 3.35 in, 85 mm
Precision Standard
Rows of Balls Double
Locking Device No Locking Device
Static Load Rating [Max] 39600 lbf
Contact Angle 30 Degree
Flush Ground No
Ball Material Steel
Inner Ring Width 1.94 in, 49.2 mm
Static Load Rating 176 kN
Seal Material None
Dynamic Load Rating 142 kN
O.D. 6.29 in, 159.7 mm
Precision Level Standard (ABEC 1)
Locating Snap Ring Fitted
Seal Type Unsealed
Snap Ring With Snap Ring
Bearing Type Unmounted, Angular Contact
Outer Ring Width 1.94 in, 49.2 mm
Limiting Speed - Oil 3600 rpm
Enclosure Open
Series 5200M
Cage Material Bearing Steel
Material Bearing Steel
Radial Internal Clearance Normal
Cage Type Metal
Width 1.94 in, 49.21 mm
Capacity Maximum Capacity
O.D. Type Cylindrical
Limiting Speed - Sealed 2600 rpm
Radial Internal Clearance Specification Normal Clearance
icNumber 7704619
Weight 8.378 LB
EAN or UPC 97741013543
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison