Skip to content Skip to navigation menu
Double Row Cylindrical Bore Angular Contact Ball Bearing

5206CG

Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #100760619
  • 30 mm ID x 62 mm OD x 15/16" Wide
  • Open
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
Double Row Cylindrical Bore Angular Contact Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 30 mm ID x 62 mm OD x 15/16" Wide
  • Open
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Contact Angle 30°
Seal Type Unsealed
Radial Internal Clearance Normal
Limiting Speed - Oil 9500 rpm
Flush Ground No
Dynamic Load Rating 6430 lbf
Material Steel
O.D. Type Straight w/ Snap Ring
Snap Ring With Snap Ring
Precision Level Standard (ABEC 1)
Precision Standard
Inner Ring Width 15/16 in
O.D. 62 mm
Radial Internal Clearance Specification Normal Clearance
Locking Device No Locking Device
Seal Material None
Cage Type Metal
Bearing Type Angular Contact
Bore Type Round Bore
Fillet Radius 1 mm
Preload Level None
Inch/Metric Metric Bore
Limiting Speed - Sealed 7000 rpm
Enclosure Open
No. in Set Single Bearing
Series 5200C
Origin Double Row Deep Groove
Limiting Speed - Grease 7000 rpm
Locating Snap Ring Fitted
Lubricant Oil Preservative
Cage Material Steel
icNumber 7697714
I.D. 30 mm
Capacity Standard Capacity
Ball Material Steel
Width 23.813 mm
Outer Ring Width 15/16 in
Rows of Balls Double
Static Load Rating 20.4 kN
Static Load Rating [Max] 4590 lbf
Temperature Range [Max] 450 °F
Weight 0.703 LB
EAN or UPC 97741011358
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison