Find a Service Center
- 80 mm ID x 200 mm OD x 48 mm Wide
- Double Shielded
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Used with exremely heavy radial loads, or a combination of radial load is predominant
features
- Maximum radial load-carrying capacity
- Ability to carry heavy combined radial and thrust loads
- Designated as the notched type because it has a filling notch on one side of the inner and outer rings
- Normally furnished with ABMA CO radial clearance
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
- Single-row maximum capacity fillig-notch bearings with bores ranging from 17 mm to 100 mm
caution
- Not to be used where only thrust loads are present
| Inch/Metric | Metric Bore |
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| Rows of Balls | Single |
| Dynamic Load Rating | 89600 lbf |
| Bearing Type | Radial |
| Seal Type | Non-Contact Seals |
| No. in Set | Single Bearing |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| Enclosure | Double Shielded |
| Radial Internal Clearance Specification | Normal Clearance |
| Contact Angle | 0° |
| Precision | Standard |
| Capacity | Maximum Capacity |
| Radial Internal Clearance | Normal |
| O.D. | 200 mm |
| O.D. Type | Straight |
| Cage Type | Metal |
| Lubricant | Polyurea Base |
| Bore Type | Round Bore |
| Fillet Radius | 2.5 mm |
| Ball Material | Steel |
| Locking Device | No Locking Device |
| Limiting Speed - Grease | 2800 rpm |
| I.D. | 80 mm |
| Material | Steel |
| Outer Ring Width | 48 mm |
| Width | 48.000 mm |
| Cage Material | Steel |
| Limiting Speed - Oil | 3400 rpm |
| Inner Ring Width | 48 mm |
| icNumber | 7700386 |
| Static Load Rating [Max] | 39600 lbf |
| Weight | 16.0 LB |
