Find a Service Center
- 55 mm ID x 140 mm OD x 33 mm Wide
- Single Shield
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Used with exremely heavy radial loads, or a combination of radial load is predominant
features
- Maximum radial load-carrying capacity
- Ability to carry heavy combined radial and thrust loads
- Designated as the notched type because it has a filling notch on one side of the inner and outer rings
- Normally furnished with ABMA CO radial clearance
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
- Single-row maximum capacity fillig-notch bearings with bores ranging from 17 mm to 100 mm
caution
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Precision Level | Standard (ABEC 1) |
| No. in Set | Single Bearing |
| Radial Internal Clearance | Normal |
| Limiting Speed - Grease | 4100 rpm |
| Fillet Radius | 2 mm |
| Ball Material | Steel |
| Seal Material | Tinplate |
| Origin | Single Row Radial |
| Seal Type | Non-Contacting Seal |
| O.D. Type | Cylindrical |
| Contact Angle | 0° |
| Material | Bearing Steel |
| Precision | Standard |
| Cage Type | Metal |
| Width | 1.3 in, 33 mm |
| Inch/Metric | Metric |
| Series | 64 |
| O.D. | 5.51 in, 140 mm |
| Rows of Balls | Single |
| Bearing Type | Deep Groove |
| icNumber | 7702516 |
| Locking Device | No Locking Device |
| Limiting Speed - Oil | 5000 rpm |
| Dynamic Load Rating | 24200 lbf |
| Static Load Rating [Max] | 20200 lbf |
| Inner Ring Width | 1.3 in, 33 mm |
| Preload Level | None |
| Bore Type | Cylindrical |
| I.D. | 2.17 in, 55 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Enclosure | Shield On One Side |
| Outer Ring Width | 1.3 in, 33 mm |
| Snap Ring | No Snap Ring |
| Cage Material | Bearing Steel |
| Capacity | Maximum Capacity |
| Lubricant | Oil Preservative |
| Weight | 5.5 LB |
| EAN or UPC | 97741010290 |
