Find a Service Center
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
- Special internal radial clearance
- Special E grade balls
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
| Material | Bearing Steel |
| Capacity | Maximum Capacity |
| Contact Angle | 15 Degree |
| Ball Material | Steel |
| Inch/Metric | Metric |
| O.D. | 8.46 in, 215 mm |
| Lubricant | Oil Preservative |
| Static Load Rating | 200 kN |
| I.D. | 3.94 in, 100 mm |
| Cage Material | Phenolic |
| Enclosure | Open |
| Temperature Range [Max] | 225 °F |
| Width | 1.85 in, 47 mm |
| Flush Ground | No |
| No. in Set | Single Bearing |
| Outer Ring Width | 1.85 in, 47 mm |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Bore Type | Cylindrical |
| Rows of Balls | Single |
| Seal Type | Unsealed |
| Series | 300RDM |
| Precision Level | Medium Precision (ABEC 5) |
| O.D. Type | Cylindrical |
| Snap Ring | No Snap Ring |
| Bearing Type | Unmounted, Angular Contact |
| Inner Ring Width | 1.85 in, 47 mm |
| Seal Material | None |
| Dynamic Load Rating | 212 kN |
| Preload Level | None |
| Locking Device | No Locking Device |
| Weight | 16.965 LB |
| EAN or UPC | 97741009577 |
