Find a Service Center
- 12 mm ID x 37 mm OD x 12 mm Wide
- Single Shield
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Single-row radial deep groove bearing with no filling notches
- Can carry significant radial loads
- Can carry substantial thrust loads in either direction, even at very high speeds
- Supplied with a pressed steel cage
| Width | 12.000 mm |
| Limiting Speed - Sealed | 14000 rpm |
| icNumber | 7696720 |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Straight |
| Inner Ring Width | 12 mm |
| Seal Type | Non-Contact Seals |
| Bore Type | Round Bore |
| Outer Ring Width | 12 mm |
| Snap Ring | No Snap Ring |
| Seal Material | Metal |
| Fillet Radius | 1 mm |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Dynamic Load Rating | 2190 lbf |
| Inch/Metric | Metric Bore |
| Static Load Rating [Max] | 933 lbf |
| Limiting Speed - Oil | 24000 rpm |
| I.D. | 12 mm |
| Material | Steel |
| Ball Material | Steel |
| No. in Set | Single Bearing |
| Contact Angle | 0° |
| Cage Type | Metal |
| O.D. | 37 mm |
| Cage Material | Steel |
| Bearing Type | Radial |
| Capacity | Standard Capacity |
| Radial Internal Clearance | Normal |
| Precision | Standard |
| Preload Level | None |
| Rows of Balls | Single |
| Enclosure | Single Shield |
| Lubricant | Oil Preservative |
| Limiting Speed - Grease | 19000 rpm |
| Weight | 0.14 LB |
