
- 75 mm ID x 130 mm OD x 25 mm Wide
- Open
- No Snap Ring
- Single Row Angular Contact Steel Bearing
applications
- Duplex bearings should be used for two-directional thrust loads
features
- Bearings are made with bore diameters ranging from 10 mm to 320 mm
- Cage types and materials available are two-piece pressed steel, ball riding, bent prong cages
Snap Ring | No Snap Ring |
Capacity | Standard Capacity |
Static Load Rating | 76.5 kN |
Inch/Metric | Metric |
Inner Ring Width | 0.98 in, 25 mm |
Outer Ring Width | 0.98 in, 25 mm |
Flush Ground | No |
Ball Material | Steel |
Temperature Range [Max] | 450 °F |
Origin | Single Row Angular Contact |
Material | Bearing Steel |
Preload Level | C3 Axial Clearance |
Contact Angle | 15 Degree |
Seal Material | None |
Lubricant | Oil Preservative |
Cage Material | Bearing Steel |
Radial Internal Clearance | Normal |
Seal Type | Unsealed |
I.D. | 2.95 in, 75 mm |
Cage Type | Metal |
No. in Set | Single Bearing |
O.D. Type | Cylindrical |
Rows of Balls | Single |
Fillet Radius | 2 mm |
Bearing Type | Unmounted, Angular Contact |
icNumber | 7703033 |
O.D. | 5.12 in, 130 mm |
Precision Level | Standard (ABEC 1) |
Static Load Rating [Max] | 17200 lbf |
Limiting Speed - Oil | 5600 rpm |
Width | 0.98 in, 25 mm |
Locking Device | No Locking Device |
Limiting Speed - Grease | 4800 rpm |
Radial Internal Clearance Specification | Normal Clearance |
Dynamic Load Rating | 88.4 kN |
Precision | Standard |
Bore Type | Cylindrical |
Series | 200R |
Enclosure | Open |
Weight | 2.8 LB |
EAN or UPC | 97741005524 |
