
- Deep Groove Bearing
- 1.38 in Inner Diameter
- 2.83 in Outer Diameter
- 0.67 in Width
- Bearing Steel Material
applications
- Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant
features
- Maximum radial load-carrying capacity
- Ability to carry heavy combined radial and thrust loads
- Designated as the notched type because it has a filling notch on one side of the inner and outer rings
- Normally furnished with ABMA CO radial clearance
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
- Single-row maximum capacity filling-notch bearings
caution
- Polycarbonate bowls are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, or temperatures outside of the rated range. As with most plastic, some chemica
Inner Ring Width | 17 mm |
Preload Level | None |
Outer Ring Width | 17 mm |
Cage Material | Steel |
Bearing Type | Radial |
Dynamic Load Rating | 6680 lbf |
Contact Angle | 0° |
Limiting Speed - Oil | 9500 rpm |
Origin | Single Row Radial |
No. in Set | Single Bearing |
Limiting Speed - Grease | 7800 rpm |
Cage Type | Metal |
Pre Lubricant | None |
icNumber | 7699745 |
Temperature Range [Max] | 450 °F |
Lubricant | Oil Preservative |
O.D. Type | Straight w/ Snap Ring |
Material | Steel |
Static Load Rating [Max] | 5130 lbf |
Rows of Balls | Single |
Radial Internal Clearance Specification | Normal Clearance |
Seal Type | Unsealed |
Width | 17.000 mm |
Precision | Standard |
Locking Device | No Locking Device |
I.D. | 35 mm |
Enclosure | Open |
Snap Ring | With Snap Ring |
Seal Material | None |
Bore Type | Round Bore |
Precision Level | Standard (ABEC 1) |
Radial Internal Clearance | Normal |
Capacity | Maximum Capacity |
Ball Material | Steel |
Fillet Radius | 1 mm |
O.D. | 72 mm |
Series | 62 |
Locating | Snap Ring Fitted |
Inch/Metric | Metric Bore |
Weight | 0.703 LB |
EAN or UPC | 97741003827 |
