Find a Service Center
- 30 mm ID x 55 mm OD x 13 mm Wide
- Single Seal, Single Shield
- No Snap Ring
- Single Row Radial Steel Bearing
features
- Single-row radial conrad-type bearings
- Made with bores ranging from 10 mm to 320 mm
- No filling notches
- Can carry significant radial loads and substantial thrust loads in either direction, even at very high speeds
- Offered open, single, or double shields or seals, and snap rings in various combinations
| Lubricant | Polyurea Base |
| Capacity | Standard Capacity |
| icNumber | 7698215 |
| Inner Ring Width | 13 mm |
| Inch/Metric | Metric Bore |
| Radial Internal Clearance | Normal |
| Rows of Balls | Single |
| Enclosure | Single Seal, Single Shield |
| Seal Material | Rubber |
| No. in Set | Single Bearing |
| Precision | Standard |
| Contact Angle | 0° |
| Locking Device | No Locking Device |
| Limiting Speed - Grease | 12000 rpm |
| Bearing Type | Radial |
| Bore Type | Round Bore |
| Material | Steel |
| Ball Material | Steel |
| Static Load Rating [Max] | 1870 lbf |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Width | 13.000 mm |
| Seal Type | Contact Seals |
| Dynamic Load Rating | 2990 lbf |
| I.D. | 30 mm |
| Cage Type | Metal |
| Outer Ring Width | 13 mm |
| Fillet Radius | 1 mm |
| Cage Material | Steel |
| O.D. | 55 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Straight |
| Preload Level | None |
| Limiting Speed - Oil | 15000 rpm |
| Limiting Speed - Sealed | 8000 rpm |
| Weight | 0.286 LB |
