25GSA50 56C1.25

GSA Series Worm Gear Reducer

Item #101371492

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Output (Shaft or Bore) Size	1 1/4 in
Output RPM @ Input RPM	35 rpm @ 1750 rpm
Motor Application	General Purpose
Box Width	6 5/8 in
Reduction Type	Single Reduction
Input Base to Shaft Center Height Basic Unit	5 13/16 in
Box Length	9 1/16 in
Output Configuration	Hollow Shaft w/ Torque Arm
Torque Out @ 1150 rpm	1285 in lb
Frame	56C
HP @ RPM	0.75 hp @ 1800 rpm
Input Configuration	C-Face Quilled
Max. Overhung Load @ 1750 rpm	N/A
Input HP @ RPM	0.7 hp @ 1150 rpm, 0.86 hp @ 1750 rpm
Ratio	50:1
Center Distance	2 1/2 in
Input (Shaft or Bore) Size	5/8 in
Thermal Input Horsepower @ 1750 RPM	N/A
Bolt Centers w/ Std. Base Kit (in)	N/A
Washdown Duty	No
Worm Position	Top
Output Torque @ RPM	1090 in lb @ 1750 rpm, 1285 in lb @ 1150 rpm
Box Height	8 1/4 in
Max. Thrust Load @ 1150 rpm	N/A
Base to Shaft Center Height Basic Unit	3 5/16 in
Output RPM @ 1750 rpm Input	35 rpm
Torque Out @ 1750 rpm	1090 in lb
Frame Size	56C
Base to Shaft Center Height w/Std. Base Kit	N/A
Weight	29.3 LB