20GSF20 145T112

GSF Series Worm Gear Reducer

Item #105758820

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Mounting flanges cannot be changed in the field

The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Torque Out @ 1150 rpm	728 in lb
Input Configuration	C-Face Quilled
Box Length	8 1/16 in
Frame Size	140TC
Thermal Input Horsepower @ 1750 RPM	N/A
Output Configuration	Hollow Shaft w/ Mounting Flange
Base to Shaft Center Height Basic Unit	2 3/4 in
Worm Position	Top
HP @ RPM	1.5 hp @ 1800 rpm
Output RPM @ Input RPM	175 rpm @ 1750 rpm
Output RPM @ 1750 rpm Input	175 rpm
Frame	140TC
Input (Shaft or Bore) Size	7/8 in
Output (Shaft or Bore) Size	1 1/8 in
Center Distance	2 in
Output Torque @ RPM	616 in lb @ 1750 rpm, 728 in lb @ 1150 rpm
Max. Overhung Load @ 1750 rpm	N/A
Input HP @ RPM	1.52 hp @ 1150 rpm, 1.92 hp @ 1750 rpm
Box Height	6 13/16 in
Base to Shaft Center Height w/Std. Base Kit	N/A
Bolt Centers w/ Std. Base Kit (in)	N/A
Motor Application	General Purpose
Reduction Type	Single Reduction
Input Base to Shaft Center Height Basic Unit	4 3/4 in
Ratio	10:1
Max. Thrust Load @ 1150 rpm	N/A
Washdown Duty	No
Box Width	6 5/8 in
Torque Out @ 1750 rpm	616 in lb
Weight	27.0 LB