20GSA30 56C1.00

GSA Series Worm Gear Reducer

Item #102125309

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

All conveyor troughs should have some type of cover not only to keep material inside the trough and to protect material in the trough from outside elements, but also as a safety precaution.

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Ratio	30:1
Output RPM @ 1750 rpm Input	58.33 rpm
Output Configuration	Hollow Shaft w/ Torque Arm
HP @ RPM	0.75 hp @ 1800 rpm
Output (Shaft or Bore) Size	1 in
Max. Thrust Load @ 1150 rpm	N/A
Frame Size	56C
Torque Out @ 1750 rpm	685 in lb
Input Configuration	C-Face Quilled
Bolt Centers w/ Std. Base Kit (in)	N/A
Input (Shaft or Bore) Size	5/8 in
Input HP @ RPM	0.67 hp @ 1150 rpm, 0.84 hp @ 1750 rpm
Base to Shaft Center Height w/Std. Base Kit	N/A
Center Distance	2 in
Frame	56C
Input Base to Shaft Center Height Basic Unit	4.75 in
Worm Position	Top
Box Height	6 13/16 in
Box Length	8 1/16 in
Thermal Input Horsepower @ 1750 RPM	N/A
Output Torque @ RPM	685 in lb @ 1750 rpm, 803 in lb @ 1150 rpm
Motor Application	General Purpose
Torque Out @ 1150 rpm	803 in lb
Max. Overhung Load @ 1750 rpm	N/A
Box Width	6 5/8 in
Reduction Type	Single Reduction
Base to Shaft Center Height Basic Unit	2.75 in
Output RPM @ Input RPM	58 rpm @ 1750 rpm
Washdown Duty	No
Weight	27.0 LB