18GSA25 56C1.00

GSA Series Worm Gear Reducer

Item #101370680

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Install guards according to applicable local and national codes for rotating shafts.

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Output Configuration	Hollow Shaft w/ Torque Arm
Worm Position	Top
Input Configuration	C-Face Quilled
Thermal Input Horsepower @ 1750 RPM	N/A
Input Base to Shaft Center Height Basic Unit	4 1/2 in
Washdown Duty	No
Bolt Centers w/ Std. Base Kit (in)	N/A
Input HP @ RPM	0.56 hp @ 1150 rpm, 0.71 hp @ 1750 rpm
Frame Size	56C
Base to Shaft Center Height w/Std. Base Kit	N/A
Output RPM @ 1750 rpm Input	70 rpm
Box Length	6 9/16 in
Ratio	25:1
Box Width	5 3/4 in
Motor Application	General Purpose
Output (Shaft or Bore) Size	3/4 in
Reduction Type	Single Reduction
Max. Thrust Load @ 1150 rpm	N/A
Output RPM @ Input RPM	70 rpm @ 1750 rpm
Output Torque @ RPM	494 in lb @ 1750 rpm, 570 in lb @ 1150 rpm
HP @ RPM	0.5 hp @ 1800 rpm
Input (Shaft or Bore) Size	5/8 in
Max. Overhung Load @ 1750 rpm	N/A
Torque Out @ 1750 rpm	494 in lb
Base to Shaft Center Height Basic Unit	2 3/4 in
Frame	56C
Torque Out @ 1150 rpm	570 in lb
Center Distance	1 3/4 in
Box Height	6 3/8 in
Weight	14.0 LB
EAN or UPC	662288062943