Find a Service Center
- Normal-Duty Pillow Block
- 2 5/16" Shaft
- 2 3/4" Center Line to Base
- 6 29/32" - 8 5/32" Bolt Spacing
- Setscrew Locking Collar
description
- Standard-duty pillow block with elongated bolt holes allow adjustment to facilitate mounting as well as alignment.
features
- Elongated bolt holes allow adjustment to facilitate mounting as well as alignment
- Provides integral unit to support shafts parallel to mounting surface
- Concentric setscrew shaft locking device
- Combination seal-flinger system
- Rugged one-piece cast iron housing
- Spherically seated bearing insert with antirotation pin
- Self-aligning assemblies usually do not require shimming at base because self-aligning of bearing within housing permits enough adjustment
| Bearing Type | Ball Bearing |
| Base Height | 1 1/16 in |
| Bolt Size | 5/8 in |
| Lubrication | Relubricatable |
| Inch/Metric | Inch |
| Locking Device | Setscrew Locking Collar |
| Mounted Unit Duty | Normal-Duty |
| Bearing Insert | MB25-2-5/16 |
| Seal Type | Contact Seals |
| Length Through Bore | 1.89063 in |
| Base Width | 2 3/8 in |
| Outer Ring Size | 212 |
| Bolt Hole Spacing | 7 17/32 in |
| Bolt Hole Spacing Range [Min] | 6 29/32 in |
| Bolt Hole Spacing Range [Max] | 8 5/32 in |
| Housing Material | Cast Iron |
| Temperature Range [Max] | 275 °F |
| Shaft Dia. | 2.3125 in |
| Base Length | 9 5/8 in |
| Housing Height | 5 15/32 in |
| Pillow Block Type | Thru-Bolt |
| Center of Bearing to Front of Inner Ring | 1 5/16 in |
| End Type | Open End |
| Housing Construction | 1 Piece |
| Bearing Design | Non-Expansion |
| Housing Width | 2 3/8 in |
| Bolt Holes | 2 |
| Series | Nyla-K® Series |
| Weight | 10.0 LB |
| EAN or UPC | 662864011358 |
