Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 60 Number of Teeth
- 16.601 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Width | 2 in |
| Hub Projection | 0.719 in |
| Width Across Teeth | 2.563 in |
| Bore Range [Max] | 4 in |
| Bore Type | Bushed |
| Belt Size | XH |
| No. of Teeth | 60 |
| Hub Dia. | 8 1/2 in |
| Belt Pitch | 0.875 in |
| Finished Bore | N/A |
| Type | C |
| Bushing Type | Taper-Lock |
| Bushing Series | 4040 |
| Hub Type | C |
| Outside Dia. | 16.601 in |
| Pitch Diameter | 16.711 in |
| Length Through Bore | 4 in |
| Material | Cast Iron |
| Bore Range [Min] | 1.4375 in |
| Weight | 75.0 LB |
| EAN or UPC | 697950084091 |
