Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 60 Number of Teeth
- 7.132 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 60 |
| Bore Range [Max] | 2 in |
| Finished Bore | N/A |
| Pitch Diameter | 7.162 in |
| Bushing Series | 2012 |
| Width Across Teeth | 1 in |
| Belt Pitch | 0.375 in |
| Belt Size | L |
| Hub Type | C |
| Bushing Type | Taper-Lock |
| Hub Dia. | 4 3/8 in |
| Length Through Bore | 1.25 in |
| Type | C |
| Bore Type | Bushed |
| Bore Range [Min] | 0.5 in |
| Material | Cast Iron |
| Outside Dia. | 7.132 in |
| Hub Projection | 1/8 in |
| Belt Width | 0.75 in |
| Weight | 8.89 LB |
| EAN or UPC | 697950084077 |
