Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 48 Number of Teeth
- 7.585 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 48 |
| Width Across Teeth | 1.563 in |
| Bushing Type | Taper-Lock |
| Bore Range [Max] | 2.5 in |
| Type | AF |
| Hub Type | A |
| Outside Dia. | 7.585 in |
| Finished Bore | N/A |
| Belt Pitch | 0.5 in |
| Bushing Series | 2517 |
| Length Through Bore | 1.813 in |
| Pitch Diameter | 7.639 in |
| Bore Range [Min] | 0.5 in |
| Bore Type | Bushed |
| Material | Cast Iron |
| Belt Width | 1.5 in |
| Belt Size | H |
| Weight | 13.71 LB |
| EAN or UPC | 697950083940 |
