Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 48 Number of Teeth
- 7.585 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Diameter | 7.639 in |
| Bore Range [Max] | 2.5 in |
| Hub Dia. | 4.437 in |
| Bushing Type | Taper-Lock |
| Hub Projection | 0.437 in |
| Length Through Bore | 1.75 in |
| Type | CF-1 |
| Width Across Teeth | 1.063 in |
| Belt Size | H |
| Hub Type | B |
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| No. of Teeth | 48 |
| Material | Steel |
| Belt Pitch | 0.5 in |
| Outside Dia. | 7.585 in |
| Bushing Series | 2517 |
| Bore Type | Bushed |
| Belt Width | 3 in |
| Weight | 12.1 LB |
| EAN or UPC | 697950083933 |
