Find a Service Center
- 0.875 in Belt Pitch
- 3 in Belt Width
- 32 Number of Teeth
- 8.803 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | XH |
| Width Across Teeth | 3.313 in |
| Finished Bore | N/A |
| Belt Pitch | 0.875 in |
| Type | KF |
| Pitch Diameter | 8.913 in |
| Outside Dia. | 8.803 in |
| Material | Cast Iron |
| Length Through Bore | 3.5 in |
| Bore Type | Bushed |
| No. of Teeth | 32 |
| Bushing Type | Taper-Lock |
| Bore Range [Max] | 3.5 in |
| Belt Width | 3 in |
| Hub Type | A |
| Bore Range [Min] | 1.1875 in |
| Bushing Series | 3535 |
| Weight | 34.81 LB |
| EAN or UPC | 697950083834 |
