Find a Service Center
- 0.38 in Belt Pitch
- 1 in Belt Width
- 32 Number of Teeth
- 3.79 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Diameter | 3.82 in |
| Hub Type | B |
| Bore Range [Max] | 1.625 in |
| Bore Range [Min] | 0.5 in |
| Belt Pitch | 0.38 in |
| No. of Teeth | 32 |
| Belt Width | 1 in |
| Bushing Series | 1610 |
| Material | Steel |
| Type | KF-1 |
| Length Through Bore | 1 in |
| Outside Dia. | 3.79 in |
| Width Across Teeth | 0.563 in |
| Finished Bore | N/A |
| Bore Type | Bushed |
| Bushing Type | Taper-Lock |
| Hub Projection | 1/4 in |
| Belt Size | L |
| Hub Dia. | 3.062 in |
| Weight | 1.9 LB |
| EAN or UPC | 697950083797 |
