Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 32 Number of Teeth
- 5.039 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Cast Iron |
| Bore Type | Bushed |
| Bushing Type | Taper-Lock |
| Width Across Teeth | 2.094 in |
| Bore Range [Max] | 2.5 in |
| Pitch Diameter | 5.093 in |
| Length Through Bore | 1.75 in |
| Bore Range [Min] | 0.5 in |
| Belt Pitch | 0.5 in |
| Belt Width | 2 in |
| Belt Size | H |
| Bushing Series | 2517 |
| Hub Type | A |
| Type | KF |
| Outside Dia. | 5.039 in |
| No. of Teeth | 32 |
| Finished Bore | N/A |
| Weight | 8.5 LB |
| EAN or UPC | 697950083773 |
