Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 30 Number of Teeth
- 3.551 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Type | KF |
| Finished Bore | N/A |
| Bore Range [Max] | 1.625 in |
| Material | Steel |
| Width Across Teeth | 1.062 in |
| Length Through Bore | 1.25 in |
| Bore Type | Bushed |
| Bushing Series | 1610 |
| Hub Type | A |
| Bushing Type | Taper-Lock |
| Belt Size | L |
| Bore Range [Min] | 0.5 in |
| Outside Dia. | 3.551 in |
| Belt Width | 1 in |
| Belt Pitch | 0.375 in |
| No. of Teeth | 30 |
| Pitch Diameter | 3.581 in |
| Weight | 1.9 LB |
| EAN or UPC | 697950083728 |
