Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 30 Number of Teeth
- 4.721 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 4.721 in |
| Material | Cast Iron |
| Pitch Diameter | 4.775 in |
| Bore Range [Max] | 2 in |
| Belt Width | 1.5 in |
| Bushing Series | 2012 |
| Belt Pitch | 0.5 in |
| Type | KF |
| Hub Type | A |
| Length Through Bore | 1.25 in |
| No. of Teeth | 30 |
| Width Across Teeth | 1.563 in |
| Finished Bore | N/A |
| Belt Size | H |
| Bore Type | Bushed |
| Bushing Type | Taper-Lock |
| Bore Range [Min] | 0.5 in |
| Weight | 5.21 LB |
| EAN or UPC | 697950083674 |
