Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 28 Number of Teeth
- 4.402 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 4.402 in |
| Type | KF |
| Bore Range [Max] | 2 in |
| Finished Bore | N/A |
| Pitch Diameter | 4.456 in |
| Bore Range [Min] | 0.5 in |
| Bushing Type | Taper-Lock |
| Length Through Bore | 1.797 in |
| Material | Steel |
| No. of Teeth | 28 |
| Bushing Series | 2012 |
| Bore Type | Bushed |
| Belt Width | 2 in |
| Hub Type | A |
| Width Across Teeth | 2.094 in |
| Belt Size | H |
| Belt Pitch | 0.5 in |
| Weight | 5.1 LB |
| EAN or UPC | 697950083599 |
