Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 26 Number of Teeth
- 4.084 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | A |
| Belt Size | H |
| Outside Dia. | 4.084 in |
| Bushing Type | Taper-Lock |
| Belt Pitch | 0.5 in |
| Type | KF |
| Width Across Teeth | 2.094 in |
| Pitch Diameter | 4.138 in |
| Finished Bore | N/A |
| No. of Teeth | 26 |
| Belt Width | 2 in |
| Bore Range [Max] | 2 in |
| Bushing Series | 2012 |
| Bore Type | Bushed |
| Material | Steel |
| Length Through Bore | 1.797 in |
| Bore Range [Min] | 0.5 in |
| Weight | 3.6 LB |
| EAN or UPC | 697950083506 |
