Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 16 Number of Teeth
- 2.492 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Type | Bushed |
| Belt Size | H |
| Finished Bore | N/A |
| Material | Steel |
| Width Across Teeth | 2.093 in |
| Length Through Bore | 0.875 in |
| Pitch Diameter | 2.546 in |
| Type | KF-1 |
| No. of Teeth | 16 |
| Outside Dia. | 2.492 in |
| Hub Projection | 3/4 in |
| Bore Range [Min] | 0.5 in |
| Belt Pitch | 0.5 in |
| Bushing Series | 1008 |
| Bushing Type | Taper-Lock |
| Belt Width | 3 in |
| Hub Type | A |
| Bore Range [Max] | 1 in |
| Weight | 1.9 LB |
| EAN or UPC | 697950083148 |
