Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 84 Number of Teeth
- 10 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Width | 0.5 in |
| Bore Range [Max] | 2 in |
| Belt Size | L |
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| Pitch Diameter | 10.027 in |
| Outside Dia. | 10 in |
| Bore Type | Bushed |
| Material | Cast Iron |
| Hardened Teeth | Without Hardened Teeth |
| Hub Dia. | 3 3/8 in |
| Hub Projection | 1/4 in |
| Type | G |
| Bushing Series | SD |
| Length Through Bore | 1.25 in |
| No. of Teeth | 84 |
| Belt Pitch | 0.375 in |
| Bushing Type | Quick Disconnect |
| Hub Type | C |
| Weight | 7.1 LB |
| EAN or UPC | 697950124131 |
