Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 84 Number of Teeth
- 13.318 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
- Agitators and mixers
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hardened Teeth | With Hardened Teeth |
| Outside Dia. | 13.3180 in |
| Length Through Bore | 1 1/4 in |
| Hub Dia. | 6 in |
| Type | H-3 |
| Bore Range [Max] | 2 15/16 in |
| No. of Teeth | 84 |
| Bushing Series | SF |
| Bushing Type | Quick Disconnect |
| Material | Cast Iron |
| Belt Pitch | 1/2 in |
| Belt Width | 1 1/2 in |
| Hub Type | A |
| Finished Bore | N/A |
| Pitch Diameter | 13.369 in |
| Belt Size | H |
| Bore Range [Min] | 1/2 in |
| Bore Type | Bushed |
| Weight | 28.0 LB |
| EAN or UPC | 697950124100 |
