Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 48 Number of Teeth
- 5.702 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Paper machinery
- Conveyors
- Fans and blowers
- Agitators and mixers
- Compressors
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | L |
| Bore Range [Min] | 1/2 in |
| Material | Steel |
| No. of Teeth | 48 |
| Pitch Diameter | 5.730 in |
| Outside Dia. | 5.7020 in |
| Hub Type | A |
| Bore Type | Bushed |
| Finished Bore | N/A |
| Bore Range [Max] | 2 in |
| Bushing Type | Quick Disconnect |
| Length Through Bore | 1 1/4 in |
| Hardened Teeth | Without Hardened Teeth |
| Belt Pitch | 3/8 in |
| Belt Width | 1 in |
| Bushing Series | SDS |
| Type | HF |
| Weight | 5.7 LB |
| EAN or UPC | 697950152349 |
