Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 32 Number of Teeth
- 3.83 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Hub Type | B |
| Outside Dia. | 3.83 in |
| Pitch Diameter | 3.82 in |
| Belt Width | 0.5 in |
| Belt Size | L050 |
| Bushing Type | None |
| Length Through Bore | 1.625 in |
| Material | Steel |
| Bore Range [Max] | 1.875 in |
| Bore Type | Reborable |
| Hub Dia. | 3.062 in |
| No. of Teeth | 32 |
| Type | PB |
| Hub Projection | 7/8 in |
| Belt Pitch | 0.375 in |
| Bore Range [Min] | 0.5 in |
| Bushing Series | N/A |
| Hardened Teeth | Without Hardened Teeth |
| Weight | 3.0 LB |
| EAN or UPC | 697950152011 |
