Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 28 Number of Teeth
- 1.763 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Type | DF-1 |
| No. of Screws | 2 |
| Set Screw Size | 8-32 x 1/8 |
| Bore Type | Bushed |
| Belt Width | 1/4 in, 3/8 in |
| No. of Teeth | 28 |
| Bushing Series | N/A |
| Hub Type | B |
| Belt Size | XL |
| Bushing Type | None |
| Outside Dia. | 1.7630 in |
| Hub Projection | 0.218 in |
| Belt Pitch | 0.200 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Range [Max] | 15/16 in |
| Bore Range [Min] | 1/4 in |
| Finished Bore | N/A |
| Material | Steel |
| Pitch Diameter | 1.783 in |
| Length Through Bore | 0.940 in |
| Hub Dia. | 1.187 in |
| Weight | 0.34 LB |
| EAN or UPC | 697950112978 |
