Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 26 Number of Teeth
- 3.114 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Width | 0.75 in |
| Bushing Series | N/A |
| Bushing Type | None |
| Bore Range [Max] | 1.625 in |
| Outside Dia. | 3.114 in |
| Belt Size | L075 |
| Bore Range [Min] | 0.625 in |
| Hub Dia. | 2 1/2 in |
| Length Through Bore | 1.875 in |
| Pitch Diameter | 3.104 in |
| Hub Type | B |
| Type | PB |
| Belt Pitch | 0.375 in |
| Finished Bore | N/A |
| Hub Projection | 7/8 in |
| Material | Steel |
| No. of Teeth | 26 |
| Bore Type | Reborable |
| Hardened Teeth | Without Hardened Teeth |
| Weight | 2.8 LB |
| EAN or UPC | 697950151724 |
