Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 26 Number of Teeth
- 4.086 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Projection | 1 1/8 in |
| Hardened Teeth | With Hardened Teeth |
| Finished Bore | N/A |
| Belt Size | H |
| Belt Width | 2 in |
| No. of Teeth | 26 |
| Bore Range [Max] | 2.5 in |
| Bore Type | Reborable |
| Material | Steel |
| Type | DF |
| Pitch Diameter | 4.138 in |
| Bore Range [Min] | 1 in |
| Bushing Type | None |
| Outside Dia. | 4.086 in |
| Length Through Bore | 3.4687 in |
| Belt Pitch | 0.5 in |
| Hub Type | B |
| Hub Dia. | 3 1/2 in |
| Bushing Series | N/A |
| Weight | 9.5 LB |
| EAN or UPC | 697950151670 |
