Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 22 Number of Teeth
- 3.447 in Outside Diameter
- H200 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 22 |
| Hub Type | B |
| Belt Size | H200 |
| Bushing Series | N/A |
| Hub Projection | 1 in |
| Belt Width | 2 in |
| Belt Pitch | 0.5 in |
| Bore Type | Reborable |
| Bushing Type | None |
| Hub Dia. | 2 7/8 in |
| Bore Range [Min] | 1 in |
| Hardened Teeth | With Hardened Teeth |
| Type | DF-1 |
| Length Through Bore | 3.343 in |
| Material | Steel |
| Bore Range [Max] | 1.875 in |
| Pitch Diameter | 3.501 in |
| Outside Dia. | 3.447 in |
| Finished Bore | N/A |
| Weight | 6.3 LB |
| EAN or UPC | 697950151410 |
