Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 20 Number of Teeth
- 2.357 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 1.187 in |
| Hub Projection | 5/8 in |
| Material | Steel |
| Belt Pitch | 0.375 in |
| Hub Type | B |
| Belt Size | L100 |
| Bushing Series | N/A |
| Bore Range [Min] | 0.5 in |
| Hardened Teeth | Without Hardened Teeth |
| Belt Width | 1 in |
| Hub Dia. | 1.687 in |
| Bore Type | Reborable |
| Bushing Type | None |
| Outside Dia. | 2.357 in |
| Type | PB |
| No. of Teeth | 20 |
| Finished Bore | N/A |
| Length Through Bore | 1.875 in |
| Pitch Diameter | 2.387 in |
| Weight | 1.75 LB |
| EAN or UPC | 697950151311 |
