Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 20 Number of Teeth
- 2.357 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 2.357 in |
| Belt Size | L075 |
| Bore Range [Max] | 1.25 in |
| Material | Steel |
| Finished Bore | N/A |
| No. of Teeth | 20 |
| Belt Pitch | 0.375 in |
| Hardened Teeth | Without Hardened Teeth |
| Bushing Series | N/A |
| Pitch Diameter | 2.387 in |
| Hub Projection | 5/8 in |
| Bore Type | Reborable |
| Hub Dia. | 1.687 in |
| Type | PB |
| Bushing Type | None |
| Belt Width | 0.75 in |
| Length Through Bore | 1.625 in |
| Bore Range [Min] | 0.5 in |
| Hub Type | B |
| Weight | 1.5 LB |
| EAN or UPC | 697950151298 |
