Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 19 Number of Teeth
- 2.238 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | B |
| Material | Steel |
| Belt Pitch | 0.375 in |
| Belt Size | L050 |
| Type | PB |
| Bore Range [Max] | 1.187 in |
| Belt Width | 0.5 in |
| Bore Range [Min] | 0.5 in |
| Bushing Series | N/A |
| Bore Type | Reborable |
| Finished Bore | N/A |
| Pitch Diameter | 2.268 in |
| No. of Teeth | 19 |
| Hub Dia. | 1 5/8 in |
| Hub Projection | 5/8 in |
| Bushing Type | None |
| Outside Dia. | 2.238 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1.375 in |
| Weight | 0.8 LB |
| EAN or UPC | 697950151199 |
