Find a Service Center
- 0.875 in Belt Pitch
- 3 in Belt Width
- 18 Number of Teeth
- 4.905 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Min] | 1 in |
| Belt Pitch | 0.875 in |
| Hardened Teeth | With Hardened Teeth |
| Length Through Bore | 4.5 in |
| Pitch Diameter | 5.013 in |
| No. of Teeth | 18 |
| Hub Type | B |
| Hub Projection | 7/8 in |
| Outside Dia. | 4.905 in |
| Material | Steel |
| Type | DF |
| Bushing Series | N/A |
| Finished Bore | N/A |
| Bushing Type | None |
| Belt Width | 3 in |
| Belt Size | XH |
| Bore Range [Max] | 2.625 in |
| Hub Dia. | 3.687 in |
| Bore Type | Reborable |
| Weight | 15.0 LB |
| EAN or UPC | 697950105574 |
