Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 16 Number of Teeth
- 2.492 in Outside Diameter
- H100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 16 |
| Bushing Type | Quick Disconnect |
| Type | EF-1 |
| Bore Range [Max] | 1 1/4 in |
| Belt Pitch | 1/2 in |
| Hardened Teeth | With Hardened Teeth |
| Belt Size | H |
| Bore Type | Bushed |
| Material | Steel |
| Bushing Series | JA |
| Bore Range [Min] | 1/2 in |
| Hub Type | A |
| Length Through Bore | 1.062 in |
| Finished Bore | N/A |
| Belt Width | 1 in |
| Outside Dia. | 2.4920 in |
| Pitch Diameter | 2.546 in |
| Weight | 1.5 LB |
| EAN or UPC | 697950150987 |
