Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 14 Number of Teeth
- 1.641 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 1.6410 in |
| Belt Pitch | 3/8 in |
| Material | Steel |
| Hub Type | B |
| Length Through Bore | 1 1/4 in |
| No. of Teeth | 14 |
| Bore Range [Max] | 7/8 in |
| Belt Size | L |
| Bore Range [Min] | 3/8 in |
| No. of Screws | 1 |
| Hub Dia. | 1 1/8 in |
| Pitch Diameter | 1.671 in |
| Bushing Type | None |
| Bushing Series | N/A |
| Hub Projection | 1/2 in |
| Finished Bore | N/A |
| Hardened Teeth | Without Hardened Teeth |
| Type | PB |
| Bore Type | Bushed |
| Belt Width | 1/2 in |
| Set Screw Size | 10-24 x 3/16 |
| Weight | 0.4 LB |
| EAN or UPC | 697950097916 |
