Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 12 Number of Teeth
- 1.402 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | B |
| Belt Width | 3/4 in |
| Material | Steel |
| Bore Range [Min] | 3/8 in |
| Belt Pitch | 3/8 in |
| Finished Bore | N/A |
| Length Through Bore | 1 1/2 in |
| Bushing Series | N/A |
| Type | PB |
| Belt Size | L |
| Pitch Diameter | 1.432 in |
| Bushing Type | None |
| No. of Teeth | 12 |
| Hub Projection | 0.438 in |
| Set Screw Size | 10-24 x 3/16 |
| Bore Type | Bushed |
| Hardened Teeth | Without Hardened Teeth |
| Bore Range [Max] | 13/16 in |
| Outside Dia. | 1.4020 in |
| No. of Screws | 1 |
| Hub Dia. | 1.062 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950093505 |
