Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 12 Number of Teeth
- 1.402 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hardened Teeth | Without Hardened Teeth |
| Hub Dia. | 1.062 in |
| Pitch Diameter | 1.432 in |
| Belt Width | 1/2 in |
| Set Screw Size | 10-24 x 3/16 |
| Bore Range [Min] | 3/8 in |
| Bore Type | Bushed |
| Length Through Bore | 1 1/4 in |
| Outside Dia. | 1.4020 in |
| No. of Teeth | 12 |
| Hub Projection | 0.438 in |
| Material | Steel |
| Bushing Series | N/A |
| Finished Bore | N/A |
| Type | PB |
| Belt Pitch | 3/8 in |
| Bore Range [Max] | 13/16 in |
| Hub Type | B |
| Bushing Type | None |
| Belt Size | L |
| No. of Screws | 1 |
| Weight | 0.3 LB |
| EAN or UPC | 697950093499 |
