Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 10 Number of Teeth
- 1.166 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| Length Through Bore | 1.125 in |
| Hub Type | B |
| Set Screw Size | 10-24 x 3/16 |
| No. of Screws | 1 |
| Belt Width | 0.5 in |
| Hub Projection | 0.313 in |
| Type | PB |
| Bushing Series | N/A |
| Pitch Diameter | 1.194 in |
| Bore Range [Max] | 0.562 in |
| Bore Range [Min] | 0.375 in |
| Belt Size | L050 |
| Belt Pitch | 0.375 in |
| No. of Teeth | 10 |
| Finished Bore | N/A |
| Hub Dia. | 0.812 in |
| Material | Steel |
| Outside Dia. | 1.166 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Bushed |
| Weight | 0.22 LB |
| EAN or UPC | 697950088242 |
