Find a Service Center
Alternate Products
- Self-Centering Style
- SLD 1900 Type
- 32 mm Inside Diameter
- 43 mm Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
caution
- Parts should not be replaced individually, but rather in total
| Thickness | 1.969 in |
| Style | Self-Centering |
| Transmitted Axial Force | 10941 lb/ft |
| Pressure on the Hub | 16389 psi |
| Material | Silver/Metallic |
| Contact Length | 25 mm |
| Transmitted Torque (Max) | 538 lb/ft |
| Screw Tightening Torque | 12.5 lb/ft |
| Pressure on the Shaft | 12183 psi |
| Screw Style | Socket Head Cap Screw |
| No. of Screws | 8 |
| Hub Bore Tolerance | 0.0015 in |
| Collar Width | 45 mm |
| Total Width @ Relaxed State | 56.01 mm |
| O.D. | 43 mm |
| Shaft Tolerance | -0.0015 in |
| I.D. | 32 mm |
| Inch/Metric | Metric |
| Type | SLD 1900 |
| Locking Type | Internal Locking |
| Mountable Thickness | 1.181 in |
| Torque | 12.5 in lb |
| Screw Material | Steel |
| Set Screw Size | M6 |
| Weight | 1.102 LB |
| EAN or UPC | 697904984538 |
