
- Self-Centering Style
- SLD 1900 Type
- 1 1/4 in Inside Diameter
- 1.693 in Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
- Zero backlash/mechanical interference fit
caution
- Design allows for possible axial shifting of components relative to the shaft, so utilize this device where exact positioning is not critical
I.D. | 1 1/4 in |
Screw Material | Steel |
Material | Silver/Metallic |
Style | Self-Centering |
Shaft Tolerance | -0.0016 in |
Transmitted Axial Force | 11702 lb/ft |
Locking Type | Internal Locking |
No. of Screws | 8 |
Transmitted Torque (Max) | 579 lb/ft |
Collar Width | 1.772 in |
Set Screw Size | M6 |
Screw Style | Socket Head Cap Screw |
Thickness | 1.969 in |
Pressure on the Hub | 12327 psi |
Type | SLD 1900 |
Total Width @ Relaxed State | 2.008 in |
Screw Tightening Torque | 12 lb/ft |
Contact Length | 0.984 in |
Pressure on the Shaft | 11129 psi |
O.D. | 1.693 in |
Torque | 12 in lb |
Inch/Metric | Inch |
Mountable Thickness | 1.181 in |
Hub Bore Tolerance | 0.0015 in |
Weight | 1.102 LB |
EAN or UPC | 697904984804 |
