Find a Service Center
Alternate Products
- Self-Releasing Style
- SLD 1500 Type
- 4 in Inside Diameter
- 5.843 in Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
caution
- Do not connect regulator to bottled gas
| I.D. | 4 in |
| Screw Tightening Torque | 91 lb/ft |
| Torque | 91 in lb |
| No. of Screws | 15 |
| Type | SLD 1500 |
| Locking Type | Internal Locking |
| Material | Silver/Metallic |
| O.D. | 5.843 in |
| Pressure on the Shaft | 29833 psi |
| Hub Bore Tolerance | 0.0035 in |
| Set Screw Size | M12 |
| Thickness | 1.299 in |
| Collar Width | 1.26 in |
| Transmitted Torque (Max) | 7677 lb/ft |
| Total Width @ Relaxed State | 1.732 in |
| Screw Style | Socket Head Cap Screw |
| Contact Length | 1.024 in |
| Style | Self-Releasing |
| Pressure on the Hub | 20423 psi |
| Mountable Thickness | 1.024 in |
| Inch/Metric | Inch |
| Transmitted Axial Force | 46062 lb/ft |
| Screw Material | Steel |
| Shaft Tolerance | -0.0035 in |
| Weight | 4.63 LB |
| EAN or UPC | 697904981148 |
